Systems
Choose your HullSonic system
Every HullSonic system runs on the same 4-channel controller. The range decides the power and the features: HS for leisure vessels, MAX for superyachts and prestige vessels.
Side by side
HS or MAX?
Choose HS for a leisure boat. Choose MAX when you want more output per channel, channel grouping, or alarm and isolation connections to the vessel’s systems. Not sure? The layout planner recommends a range for your boat.
Leisure vessels
HullSonic HS
For cruisers, sailboats and catamarans. 50 W per channel, with an ECO mode for boats on solar, wind or limited shore power.
- HullSonic HS200 Two transducers on a 4-channel controller A$1,745.00 incl. GST
- HullSonic HS400 Four transducers, all four channels working A$3,020.00 incl. GST
Superyachts and prestige vessels
HullSonic MAX
The system owners knew as CleanAHull. 60 W per channel, channel grouping, and alarm, isolation and boost connections to the vessel’s systems.
- HullSonic MAX2 Two commercial-duty channels on the MAX controller A$2,380.00 incl. GST
- HullSonic MAX4 The flagship: four commercial-duty channels A$3,655.00 incl. GST
| HullSonic HS | HullSonic MAX | |
|---|---|---|
| Made for | Leisure vessels | Superyachts and prestige vessels |
| Models | HS200: 2 transducers, upgradeable to 4 HS400: 4 transducers |
MAX2: 2 transducers, upgradeable to 4 MAX4: 4 transducers |
| Controller | 4-channel hardware | |
| Output per channel | 45–55 W, 50 W default | 45–65 W, 60 W default |
| Total output with four transducers | 200 W (4 × 50 W) | 240 W (4 × 60 W) |
| Frequency | 19–80 kHz, auto-calibrating per channel | |
| Channel grouping | — | Yes: pairs of channels driven as one zone, for large flat hull sections, sea chests and box coolers |
| Connections to the vessel’s systems | — | Alarm header, isolation input, external boost input |
| Display | Colour display | |
| Power modes | ECO / STANDARD / BOOST | |
| WiFi and updates | WiFi, over-the-air firmware updates | |
| Power supply | 12–24 V DC, auto-sensing | |
| Transducer | HS-T50 | HS-T60 |
| Transducer cable | 10 m (32 ft) silicone rubber, attached to each transducer | |
| Sealing | IP67 control module, IP68 transducers | |
| Certification | FCC · CE · RCM · RoHS (control module) | |
| Warranty | 3 years return-to-base, extended while a HullSonic dashboard plan is active | |
| From two transducers to four | HS transducer upgrade kit A$1,415.00 incl. GST |
MAX transducer upgrade kit A$1,415.00 incl. GST |
| Price | from A$1,745.00 incl. GST | from A$2,380.00 incl. GST |
Two or four transducers
Start with two, upgrade to four
HS200 and MAX2 ship with the full 4-channel controller and two transducers. Channels 3 and 4 are installed and switched off. When you want more coverage, fit the transducer upgrade kit and switch the channels on from the module’s menu or the HullSonic dashboard. No new controller, no rewiring.
If you already know you need four, buy the four-transducer system: it always costs less than a two-transducer system plus the kit.
Every system includes
Built for the boat, not the brochure
- 4-channel controller On every system, with a colour display and ECO, STANDARD and BOOST modes.
- Auto-calibration Every channel tunes itself across 19–80 kHz to the hull section its transducer is bonded to.
- 12/24 V supply Auto-sensing, with a galvanically isolated drive, so no electrolysis.
- WiFi and over-the-air updates Ready for the HullSonic dashboard.
- Sealed and certified IP67 control module and IP68 transducers. FCC, CE and RCM, with a RoHS-compliant control module.
- 3-year warranty Extended for as long as a HullSonic dashboard plan is active.
The technology
Four channels, each tuned and checked on its own
Every HullSonic control module, HS or MAX, runs its four channels as four separate systems. Each is tuned to the hull under its transducer, retuned as it runs, and watched for faults the whole time.
- One control module drives four channels, and treats each as a system of its own.
- Each channel sweeps 19–80 kHz and tunes itself to the hull under its transducer, because thickness, material and shape differ from one spot to the next. It keeps retuning while it runs.
- Each channel is checked for a cable that is disconnected, a short circuit and a transducer that has come away from the hull.
- The display shows the state of every channel, and a fault lights the warning lamp, so you know which transducer to look at.
Not sure how many transducers?
Pick your boat, drive and what you want protected. The layout planner draws the transducer positions on your hull and puts the matching HS or MAX system in your cart.