HullSonic MAX · formerly CleanAHull
Commercial-grade power and reliability for superyachts and prestige vessels
MAX is the system owners knew as CleanAHull, now part of the HullSonic range: 60 W channels, channel grouping and integration with the vessel’s systems.
MAX2 A$2,380 · MAX4 A$3,655 · express delivery worldwide

Models
MAX2 and MAX4
Two transducers · upgradeable
HullSonic MAX2
The MAX controller with two transducers; channels 3 and 4 are ready for the MAX upgrade kit. A$2,380.00 incl. GST
View MAX2Four transducers · flagship
HullSonic MAX4
Four channels at 60 W (240 W), groupable into two coherent zones. A$3,655.00 incl. GST
View MAX4What MAX adds
More power, and a place in the yacht’s own systems
Power
More output on every channel
45–65 W per channel, set to 60 W at the factory.
Coverage
Channels that work as one
Channel grouping drives pairs of channels as a single zone across the long, flat hull sections of a big yacht.
Integration
Wired into the vessel
An alarm header reports channel faults and system status to the yacht’s monitoring, plus isolation and external boost inputs.
Everything in the HS range is here too: the colour display, WiFi and over-the-air updates, ECO, STANDARD and BOOST modes, and four channels that tune themselves to the hull.
Already own a CleanAHull system? It’s supported, and so is its warranty. What the change means for CleanAHull owners.
Proven on superyachts
The system the big yachts already run
MAX is the system owners and captains knew as CleanAHull. It has been fitted to the Alloy Yachts superyachts Encore, Mondango 3 and Janice of Wyoming, and to owners’ yachts such as the Nordhavn 55.
It is designed, built and supported by the same engineering team on the Gold Coast, now with a new generation of the control module.
Which one?
Two transducers or four
The number of transducers follows the length of the hull, because each one protects a zone about 4.5–5 m across and the zones have to overlap.
Rudders, thrusters, pod drives and jets can add a transducer of their own. The layout planner works out the positions and the system for your boat.

Typical layouts for power, sail and catamaran hulls by boat length. A guide only.
In the box
Everything to fit it
- Control module The 4-channel controller, with its 5 m battery cable already attached.
- Transducers Two or four, each with 10 m (32 ft) of silicone rubber cable attached.
- Mounting rings One for each transducer, bonded inside the hull.
- Installation kit Epoxy adhesive and mixer for the rings, and gasket material for the transducer faces.
- Fuses An in-line fuse and a spare fuse kit.
- Manual A full-colour installation and operation manual.
Commercial vessels
Running a workboat or a fleet?
For commercial vessels, sea chests, box coolers and industrial cooling, our ENVSonic range is engineered for continuous commercial duty. Visit ENVSonic.
Not sure how many transducers?
Pick your boat, drive and what you want protected. The layout planner draws the transducer positions on your hull and puts the matching HS or MAX system in your cart.