HullSonic HS · leisure vessels

Ultrasonic antifouling for cruisers, sailboats and catamarans

Four channels at 50 W, auto-calibrating to your hull, with modes that respect a solar or shore-power budget.

HS200 A$1,745 · HS400 A$3,020 · express delivery worldwide

Stop fouling, start saving: the HullSonic HS400 control module and four transducers

Models

HS200 and HS400

Two transducers · upgradeable

HullSonic HS200

The full HS controller with two transducers: the right specification for many boats under 10 m. Add two more with the HS upgrade kit any time. A$1,745.00 incl. GST

View HS200

Four transducers

HullSonic HS400

All four channels working: for larger hulls, twin running gear and high-fouling moorings. A$3,020.00 incl. GST

View HS400

Designed for leisure boats

What HS gives you

  • 45–55 W per channel, factory-set to 50 W
  • ECO mode for boats on solar, wind or limited shore power; STANDARD and BOOST when you need more
  • Self-tuning channels: each one sweeps 19–80 kHz and adjusts to the hull thickness and material under it
  • Colour display, WiFi and over-the-air updates
  • Fits GRP, aluminium and steel hulls; cored hulls need a small preparation at each transducer site

Which one?

Two transducers or four

The number of transducers follows the length of the hull, because each one protects a zone about 4.5–5 m across and the zones have to overlap.

To about 10 m

Two transducers

The HS200.

View HS200

About 10 to 15 m

Four transducers

The HS400.

View HS400

Larger boats

Six or more

Two or more systems working together.

Plan my layout

Catamarans

Four or more

Each hull needs its own coverage.

Plan my layout

Rudders, thrusters, pod drives and jets can add a transducer of their own. The layout planner works out the positions and the system for your boat.

Transducer layout guide by boat length

Typical layouts for power, sail and catamaran hulls by boat length. A guide only.

In the box

Everything to fit it

  • Control module The 4-channel controller, with its 5 m battery cable already attached.
  • Transducers Two or four, each with 10 m (32 ft) of silicone rubber cable attached.
  • Mounting rings One for each transducer, bonded inside the hull.
  • Installation kit Epoxy adhesive and mixer for the rings, and gasket material for the transducer faces.
  • Fuses An in-line fuse and a spare fuse kit.
  • Manual A full-colour installation and operation manual.
Example: a 12 m cruiser with four transducers, their zones overlapping along the hull.

Not sure how many transducers?

Pick your boat, drive and what you want protected. The layout planner draws the transducer positions on your hull and puts the matching HS or MAX system in your cart.

Plan my layout