Compare

Ultrasonic, paint, Coppercoat or a diver?

You do not have to choose. HullSonic works with the coating you already have and makes it last longer. Here is how the methods compare, on their own and together.

The short answer

HullSonic makes the other methods last longer

Coatings

Two to three times the life

Paint and copper coatings have less growth to hold off, so they can last two to three times as long before a recoat.

Cleaning

Fewer haul-outs and dives

With less growth taking hold, the hull needs lifting and scrubbing less often.

On the water

A smoother hull, for longer

A cleaner hull between haul-outs helps the boat keep its speed and handling.

What you gain depends on your boat, your water and how you use it.

Methods

How the options compare

Method
On its own
With HullSonic
Antifouling paintAblative or hard
On its ownBiocide in the paint slows growth. It wears away over a season or two, and boats that sit still foul fastest.
With HullSonicThe paint has less growth to hold off, so it lasts longer and the hull stays cleaner as it wears.
Copper-epoxy coatingSuch as Coppercoat
On its ownA long-life copper coating. It needs regular light cleaning to stay active.
With HullSonicLess growth settles, so it needs cleaning less often.
Diver cleaningIn the water
On its ownRemoves growth after it has formed. A cost that comes round again, and scrubbing wears the coating.
With HullSonicFewer dives, and lighter ones.
UltrasonicHullSonic
On its ownStops growth settling in the first place, around the clock, from inside the hull. Releases nothing into the water.
With the othersWorks with all of the above. We recommend keeping your antifouling paint.

Savings calculator

See what HullSonic could save you

Tell us what you spend on haul-outs and diver cleans today, and see what changes when HullSonic works alongside your antifouling.

What you spend now

Lift, pressure wash, paint and labour.

What changes with HullSonic

Your antifouling lasts longer, so haul-outs and diver cleans come round less often.

Change these figures

Our estimate is a range. Choose a figure of your own to use that instead.

What you could save

You could save about — a year

What you spend now
—
With HullSonic
—

Each year, on haul-outs, antifouling and diver cleans.

—

Not sure which system fits your boat? The layout planner works it out.

About this estimate

  • This is an estimate from the figures you enter, not a quote or a guarantee. Results depend on your boat, your water and how you use it.
  • Fuel is not counted. A cleaner hull can use less fuel under power, but how much varies widely from boat to boat, and under sail it may be nothing.
  • The payback uses the price of the system only. If an installer fits it for you, add what they charge.

To be straight with you

What HullSonic does not do

  • It does not remove growth that is already there. Start with a clean hull, ideally after a fresh antifouling.
  • It does not replace your coating. It makes the coating last.
  • It does not work switched off. Protection needs the system running all the time.

More on what affects results: does ultrasonic antifouling work?

Choosing an ultrasonic system

What to compare

  • Channels and output per channel, not just total watts
  • Frequency sweep and per-channel calibration to the hull section
  • Coverage per transducer and whether the supplier helps you lay it out
  • Certification of the complete system (FCC, CE, RCM)
  • Warranty length and local installer support
  • Upgrade path without replacing the controller
Example: a 12 m cruiser with four transducers, their zones overlapping along the hull.

Not sure how many transducers?

Pick your boat, drive and what you want protected. The layout planner draws the transducer positions on your hull and puts the matching HS or MAX system in your cart.

Plan my layout